The short answer: two dogs who sleep together need a bed at least as long as the longer dog stretched out plus the width of the second dog lying beside them, and then room to move. For most pairs that means an X-Large or XX-Large cushion, an XX-Large bolster bed, or a custom size made to your measurements. Every bed on this list is one we make, and we have put the sizes next to each so you can check them against your dogs.
Dogs who share a bed share it in a particular way: one sprawls and one curls, or both lean on each other, or they start together and end up on opposite ends. Watch how your two actually sleep for a few nights before you choose a shape. Then measure. Our size guide explains measuring one dog; the section after the list covers the arithmetic for two.
1. Rectangle Dog Bed, X-Large (52″ x 36″)
The Rectangle Dog Bed in X-Large is 52″ wide by 36″ deep and rated for 70+ lbs, which makes it the simplest two-dog bed we make. A flat cushion has no bolsters eating into the sleeping area, so the whole 52″ x 36″ is usable: two medium dogs side by side, or a large dog and a small one who tucks in against them.
Choose the fill for the heavier dog. Premium Fiberfill is plush and adjustable; 4″ Memory Foam spreads weight evenly; 4″ or 5″ High-Density Foam is the firmest and holds its shape longest under two dogs’ worth of weight. The fill guide compares them.
2. Rectangle or Square in a custom size, up to 80″ x 40″
When even X-Large is not enough, or when the bed has to fill a particular corner, order the Rectangle or Square as a custom size. Both go up to 80″ wide and 40″ deep, entered in half-inch steps, and the price shows as soon as you type the size. Two large dogs who sleep nose to tail can have a 72″ cushion; two who sleep side by side can have a wider, shallower one.
Sizes over 53″ wide may need a seam in the fabric. On a very large cushion we use 4″ or 5″ high-density foam depending on the overall size; if you need a specific thickness, tell us in the order notes. This is also the way to make one cushion for a shared crate or a built-in nook: measure the inside and enter it.
3. Pillow Dog Bed, XX-Large (52″ x 36″)
The Pillow Dog Bed is our lowest-profile cushion, and in XX-Large it is the same 52″ x 36″ footprint as the Rectangle X-Large, rated 70+ lbs. There is no edge to climb over, so it suits a pair where one dog is older or small, and it is reversible, so you can flip it when one side has had a long week. Custom sizes go to 80″ x 45″. It comes with Premium Fiberfill, which you can adjust by removing fill if one dog likes it softer.
4. Cuddle Bolster Dog Bed, XX-Large (40″ x 32″ x 10″)
Some pairs want something to lean on. The Cuddle Bolster Dog Bed in XX-Large is 40″ x 32″ with 10″ bolsters around the back and sides and a dipped front, rated up to 90 lbs. Bolsters take up part of the outside size, so this is a bed for a large dog plus a small or medium one, or two medium dogs who like to curl in against each other. The Cozy Cuddle is the same size with bolsters at one height on all four sides, for pairs that like to be surrounded. Both go to a 52″ x 36″ custom size.
A removable seat cover is an option on both: with two dogs on one seat, being able to wash just that piece is worth having.
5. Throne Bolster Dog Bed, XX-Large (50″ x 36″ x 10″)
The Throne Bolster Dog Bed is the biggest bolster bed we make: XX-Large is 50″ x 36″ outside with a 42″ x 28″ inside seat, 4″ thick high-density foam bolsters and an attached furry fleece blanket, rated for dogs 80+ lbs. Two dogs who both want a wall to lean on, or one big dog and a burrower who wants under the blanket, fit here. The sides are always high-density foam, so they hold their shape with two dogs pressing against them.
6. A custom cushion for the space they already share
Plenty of two-dog households already have a shared spot: the floor of a double crate, a mudroom bench, a window seat, a cabinet opening. A custom-size cushion made to that space, wall to wall, gives both dogs a bed that stays where it is put. Measure the opening at its narrowest point and the depth from front to back, and enter those as the size. For a crate, our guide to measuring a dog crate shows where the tape goes, and if the crate is covered, crate covers for multi-dog homes covers the rest.
For a bench or window seat that people sit on too, choose high-density foam.
Two-Dog Beds at a Glance
| Bed | Largest standard size | Weight guide | Custom up to | Best for a pair who |
|---|---|---|---|---|
| Rectangle Dog Bed | X-Large, 52″ x 36″ | 70+ lbs | 80″ x 40″ | Sprawl side by side |
| Square Dog Bed | Large, 36″ x 36″ | Up to 60 lbs | 80″ x 40″ | Need a custom size for a corner |
| Pillow Dog Bed | XX-Large, 52″ x 36″ | 70+ lbs | 80″ x 45″ | Want a low step-in |
| Cuddle / Cozy Cuddle | XX-Large, 40″ x 32″ x 10″ | Up to 90 lbs | 52″ x 36″ | Curl in and lean |
| Throne Bolster Dog Bed | XX-Large, 50″ x 36″ x 10″ | 80+ lbs | 52″ x 36″ | Both want a wall and a blanket |
Weight guides are for the bed’s construction, so add both dogs together when you check them. Sizes are the outside of the bed; on bolster beds the sleeping area inside is smaller.
How to Measure for Two Dogs
- Measure the longer dog from nose to the base of the tail, lying stretched out. That is the minimum length.
- Measure the second dog’s width shoulder to shoulder, or their curled-up diameter if they always curl. Add it to the longer dog’s width to get the minimum depth for side-by-side sleepers; add it to the length if they sleep nose to tail.
- Add room to move: 8 to 12 inches for a cushion bed, 5 to 8 inches for a bolster bed, since bolsters take up some of the outside size.
- Add both weights and check them against the size’s weight guide.
- Pick the shape for the dog who is fussier about how they sleep. A sprawler is unhappy in a bolster bed; a leaner is unhappy without one.
If the result falls between two standard sizes, go up a size or enter the exact number as a custom size. The size calculator does the single-dog math; for two, use the steps above.







